Technical characteristics

The mission of the company "VESK" - to make life on the planet technological safety, environmentally cleaner, reduce the influence of the "greenhouse effect" on the flora and fauna, to reduce energy consumption: gas, oil, coal, electricity, solar and wind energy, as a consequence of human activity, associated with the production of material goods.

Liquid ceramic thermal insulation Lic Ceramic

Eastern Energy Saving Company offers you a unique product developed on the latest technologies of insulation – liquid ceramic thermal insulation coating «Lic Ceramic». This unique energy saving product possesses high water-, thermo - and noise-insulating properties. This liquid “heater”, according to the State Construction Norms of Ukraine, recommend using in Housing Stock to prepare the buildings and constructions for a heating season Also Lic Ceramic (LC) use on intra house heating systems. Thermal insulation coating Lic Ceramic (LC) allows to reduce a consumption of gas, solid fuel or the electric power by 30-40%. After all, when using on walls of buildings the liquid ceramic thermal insulation of our production the economy of heat in recalculation will make 118232 W/year on each 100 sq.m. At application of liquid ceramic thermal insulation on pipes or steam lines (carrier +85 temperature C) - the economy will be 8017 KW/year on each square meter.

Our products

Lic Ceramic - Standart
Lic Ceramic - Стандарт

Price - 8,5 €/liter
Lic Ceramic - Ultra
Lic Ceramic - Ультра

Price - 12 €/liter
Lic Ceramic - Termo
Lic Ceramic - Термо

Price - 12 €/liter
Lic Ceramic - AT 650
Lic Ceramic - AT 650

Price - 14 €/liter
Lic Ceramic - Anticor
Lic Ceramic - Anticor

Price - 14 €/liter

 

The quality and technical characteristics of liquid insulation LC significantly higher than foreign and domestic analogs. About it, many heads of the largest enterprises and the companies of Ukraine who at present safely apply our materials can testify. They managed to lower expenses on energy resources by tens and hundreds thousand dollars.

Researches showed that in a residential block of flats through uninsulated wall loses up to 40% of heat, through the windows - about 18%, the basement of the building loses 10%, slate roof - 18%, vents - 14%. But today for heat savings the main way there will be an essential increase of thermal efficiency of a cover of a construction, including its walls.

Lic Ceramic found a very wide application for the complete isolation of various steam lines, pipelines, facades industrial and residential buildings, as well as covering containers of any material dryers, and the like.

The main and most important difference between the liquid insulation «Lic Ceramic» from the traditional present thermal insulation materials - is that a thin coat layer is used, which is several times less than traditional coverings and thus keeps necessary properties.

Insulation material "Lic Ceramic" has excellent reflective properties. The reflection coefficient is determined by the blackness level. For "Lic Ceramic" it is equal to 0.095 at temperature range from 40°C to 70°C. For example, the reflection coefficient for white enamel at 20°C - 0.9, for the brilliant galvanized iron at a temperature of 30°C - 0.23. Studies concerned this subject were conducted by the Thermophysics Engineering Institute of the National Academy of Sciences of Ukraine. We can conclude that the thermal insulation coating "Lic Ceramic" is indispensable for use on surfaces exposed to sunlight (the roofs of the south side of buildings, floating platforms, ships, rolling-stock, fuel storages, storages of explosive materials, storage tank of liquid hydrocarbons, etc.). Manmade objects are protected from explosions, fires by the thermal insulation "Lic Ceramic".

Eastern Energy Saving Company offers you the following types of the products:

Lic Ceramic – Standard

Lic Ceramic – Standard it is recommended to apply only in a warm season. Application temperature has to be from +5 to +50 °C. Range of working temperature from-50 to +260 °C.

Lic Ceramic – Ultra

Absolutely new heat-insulating material. It has significant differences from the standard version. Except white color, the heat conductivity indicator strongly improved, and makes 0,0012. Specific weight of thermal insulation decreased and makes only 0,45 - 0,55 instead of 0,8. This has a direct impact on reducing the expense of a material when applying it on a surface. When the material is in a liquid state, it does not require constant agitation, because the microspheres are uniformly distributed (spread) in the polymer composition.

Lic Ceramic – Thermo

This kind of material is recommended for work on the application during the cold season. It is intended for use only on metal surfaces. Application temperature of this type of liquid insulation from -20 to +50 ° C. And working temperature is from-50 to + 400 °C.

Lic Ceramic – Thermo ХС

It is recommended to be used as a thermoinsulating coating, which should provide enhanced chemical-resistant surface protection against the following influences:

- aggressive gases (carbon dioxide, nitrogen oxide, sulfur etc.);
- solutions of salts;
- alkalis;
- acids (hydrochloric, sulfuric, nitric).

Lic Ceramic - AT 650

Technologically corrosion and heat resistant cover Lic Ceramic AT 650. Main purpose - is the creation of a protective anti-corrosion paint for any metal equipment that is operated under conditions of high humidity or temperature. That is for oil pipelines, gas pipelines and steam lines with hot steam, and also furnaces for saunas, baths and chimneys. This corrosion-resistant coating is used for drawing on exhaust systems of cars, details of the engine and other metal surfaces which are exposed at installation and operation to influence of a wide range of temperatures from-60 to +650 °C and various aggressive factors. Such as concentrated solutions of salts, petroleum and mineral oils. A heat-resistant paint can be applied even in an electrostatic field and at temperatures below zero. Corrosion-resistant paint can be used for painting the brick, concrete, reinforced concrete and asbestos surfaces of any type in order to make the protective properties of very high temperatures, humidity, precipitation, corrosive environment, but maintaining good water vapor permeability. Recommended for use as a fire-prevention finishing of ceilings and walls on ways to evacuate people in the following areas: stairwells, elevator lobbies, lobbies, common corridors, lobbies and hallways of buildings, with the exception only of high buildings. More Lic Ceramic AT 650 apply as a heat-resistant covering to the furnace.

 

 

THERMOINSULATING PLASTERING MIX LIC CERAMIC (TPM)

Insulation plastering mix (insulating plasters) of our producing company has a number of significant advantages:

- environmentally safe;
- absolutely nonflammable;
- completely hydrophobic;
- frost-resistant.

Thermal insulation plaster «Lic Ceramic» designed for hydro, thermal and acoustic insulation. Allows you to align walling of perlite concrete and cellular concrete blocks, metal, brick and other building materials. Used inside and outside buildings. Coating thickness of 1 to 2 cm.

Any heated subject radiates infrared rays and all generated heat is lost irrevocably.

Popular modern types of insulation (foam plastic, mineral wool, polyurethane foam, etc.) just detains heat and do not allow contacting to cold, but do not return the heat back.

Insulating coating Lic Ceramic has a pronounced heat reflecting effect, eliminates contact with the cold and returns up to 70% of infrared rays!

The heat reflecting effect of the insulation makes the air, being in its filler, discharged. Discharged air is the second component after vacuum with the lowest coefficient of heat conductivity. It brings to that the infrared wave velocity increases in hundreds thousands times and they, respectively, most effectively (to 70%) are reflected from all surfaces of a filler.

That part of infrared radiation (about 30%), which vector of movement was most perpendicular to filler surfaces, passes through it and leaves irrevocably.

It allows to apply warming paint in rooms without prejudice to walls.

– it can be put with a thin layer (thickness of one technological layer — 0,5 mm);

– does not support combustion, slow the spread of smoke;

– nontoxic, ecological and fireproof;

– lightweight, elastic;

– thermal stability - to + 260 ° C.;

– it can be put on working objects without stopping a production cycle at temperatures from +5 °C to +150 °C;

– reduces heat exchange (no hot spots, no effect of vertical thrust);

– possesses good adhesion to all surfaces;

– reduces/eliminates condensation without risk of formation of a rust;

– does not support combustion, slow the spread of smoke;

– it is easily put on non-standard surfaces;

– high resistance to influence of ultra-violet radiation.

Lic Ceramic is a product ready to application and it is intended for drawing on a surface of any configuration, for the solution of the following tasks:

· Insulation of building walls - internal and external thermal insulation of brick walls of public and industrial buildings;

· thermal insulation of steam pipelines, pipelines of hot water, water-heating equipment of boiler rooms (pipe thermal insulation) - anticorrosive protection;

· reduction of heat loss;

· reduce the expenses for cooling and prevention of an overheat of refrigerators and freezers;

· elimination of formation of condensate;

· effective increase of energy saving;

· anticorrosive protection;

· fight against frost penetration in walls of premises;

· preventing the formation of ice dams and icicles;

· Esthetic appearance of the surface processed by a material.

The comparative characteristic of insulating materials under equal conditions:

Material

Heat conductivity coefficient

Heat emission coefficient

Layer thickness, cm

Plates mineral-cotton sewed

0,046

8

4

Polyurethane polyfoam elastic

0,04

11

3,6

Insulation type «URSA»

0,042

8

3,7

«Lic Ceramic»

0,0025

2

0,1

The color palette of thermal isolation Lic Ceramic

Lic Ceramic – is a liquid ceramic thermal insulation, the coating of white, gray or other color, which after drying forms a flexible thermo-, hydro-and noise-proof coating.

This material provides thermo-insulating, anticorrosive, water-repellent and other protection of concrete, metal, ferroconcrete, brick, wooden, glass, rubber surfaces.

It is recommended to use as thermal insulation of pipes and air ducts for prevention of heating, to apply on shutoff valves and latches to protect them from the hot and temperature decreasing.

Used for the treatment of processing equipment: boilers, heating chambers, boilers, kilns, etc.

It is put as paint and works as a "thermal barrier".

 

Fields of Application of Liquid Ceramic Thermal Insulation Lic Ceramic

 

Lic Ceramic – Standard

• The objects requiring thermal insulation;

• Thermal insulation of residential and production buildings, both the inner and the outer side;

• Thermal insulation of floors;

• Thermal insulation of bodies of cars, locomotives, etc.;

• Protection of technological equipment from high temperatures;

• Objects subject to corrosion;

• Objects on which condensation is possible;

• Objects remote for usual thermal insulation;

• Production and operation of energy-saving equipment;

• Refrigeration, air conditioning;

• Heat exchangers;

• Oil, gas, water, steam, and other pipelines;

• Corrosion protection of various types of energy and electrical equipment;

• Capital and maintenance repair of chimneys, air ducts of conditioning, the enterprises of the oil, gas, power, metallurgy industry, etc.;

• Insulation of metal roofs;

• Insulation of metal constructions;

• Thermal insulation of hangars and garages;

• Engine rooms of ships;

• Decks and internal part of the case of vessels;

• Thermal insulation of elevators;

• Thermal insulation of poultry farms;

• Thermal insulation of electrical equipment, such as infrared heaters.

 

Lic Ceramic – ХС Thermo

• Chemically-resistant, heat insulating protection of equipment, wood, metal and concrete structures and buildings, periodically or continuously exposed to aggressive chemicals;

• Chemically-resistant, heat insulating protection of external surfaces of tanks for processing, storage and transportation of petroleum, petroleum products, solvents, acids, alkalis, salt solutions;

• The outer surfaces of oil and gas pipelines;

• Sea platforms, chemical plants and galvanic departments;

• Sewage treatment plants, drain and sewerage systems;

• Systems of ventilation, water treatment and heatwater supply.

Fields of application of hyperfine insulation Lic Ceramic is constantly extends.

Local estimate for insulation of a polymerization chamber framework is on this link.

We offer you the estimate on the warming of facades with mineral slabs 100 mm thickness and finishing by decorative solution under CEREZIT technology (the walls are smooth), you can download it here.

To your attention the estimate on the warming of facades with expanded polystyrene slabs with 100 mm of thickness and finishing by decorative solution (the walls are smooth), here is the link.

By the end, it is offered to your attention the local estimate on the thermal insulation of facades (painting of facades), specifically using "Lic Ceramic", you can download it here.

 

After reviewing all three estimates, you are convinced of higher savings with using the material "Lic Ceramic", as a thermal insulating coating.

1. Reducing of operating costs during the heating season, by of heat loss with the help of insulating of constructions and interior of buildings.

2. Decreasing of operational costs on air conditioning in rooms, by isolation of a roof and building walls.

3. Reduction in direct costs during the construction of buildings and structures due to the possibility of reducing the thickness of walls, foundations dimension when applying insulation as a "heat shield".

4. Possibility of replacement of bulky systems of warming of facades, walls of buildings and constructions.

5. Reduce the labor costs and construction time by using insulating material.

6. Reduce the cost of repair of old insulation by eliminating the need to dismantle it.

7. High warranty period of operation of a material.

8. Decrease in labor costs and time when using Lic Ceramic due to ease and simplicity of work with a material.

9. Reduce the cost of repairs after the warranty period due to the lack of having to remove the old insulation.

10. Reduce the cost of saving heat energy in the pipelines, boilers, etc. due to the high thermal insulation characteristics of complete isolation of pipes, boilers, etc., even in the most remote places.

11. Possibility of applying directly on a hot surface, without stopping current heating network or steam boiler.

12. Decrease in expenses on thermal insulation installation due to reducing of the technological operations connected with warming of pipelines, etc. on using of Lic Ceramic as thermal isolation.

13. Competitive price of the material in comparison with commonly used insulations.

Annual economy of fuel on building heating

Object

Heat savings using insulation

Annual fuel savings on heating of a building

standard fuel

coal

fuel oil

100 sq.m. of a wall

118232 W/year

14.52 tons

15.18 tons

10.98 tons

6000 sq.m. of a wall

7093920 W/year

871 tons

911 tons

659 tons

Calculations are executed for thermal insulation of an external protecting design of 9 floor five sectioned residential building.

Доработка сайта Genesis Group, продвижение сайта Seo Angels